X212AFD
July 2021
45
Amate Audio
A.6 SETTINGS submenu
Settings submenu has two screens. We can switch one to another using the
NEXT/BACK buttons.
A. INPUT selection: Here we can choose which signal input the internal processor
will use. The options are: ANALOG, DANTE or AUTO. In AUTO mode the unit
automatically choose the signal input according to the presence of signal. If a
conflict happens (Simultaneously use of analogue and digital connectors) the
unit priories digital AoIP Dante signal. In case Dante signal is no longer
available, the unit will switch to use the analogue input.
B. ECO mode: Enabling/disabling the energy saving mode. The options are:
o
PWR ON: The energy saving mode is enabled
o
Standby: The energy saving mode is disabled
o
Auto: The energy saving mode will be enabled automatically after three
minutes without input signal
C. SWEEP: Diagnosis mode. The loudspeaker will emit a frequency sweep.
D. Backlight: Three backlight intensities: MAX (Maximum), MED (Medium), MIN
(Minimum)
AUTO
PWR ON
NEXT
SWEEP
MAX
BACK
A
B
C
D
