X212AFD
July 2021
41
Amate Audio
A ANNEX. TOUCH PANEL OPERATION
Amate Audio’s X212AF
D internal DSP
parameters could be tuned using its integrated
LCD touchscreen.
The explanations here are valid for firmware
version 2.0.0 and newer.
A.1 Main screen
Just after turning on the loudspeaker unit, a first screen shows the: Amate Audio’s
logo, firmware version and the processing version. Once the system is initialized, a
welcome screen shows a picture of the system and the serial number.
When all the start-up process finish, the main screen is shown like:
A. Loudspeaker model
B. System status
o
INPUT: Shows the selected audio source. The options are:
ANALOG
for
XLR analogue input,
DANTE
for the RJ45 Dante digital audio input or
AUTO
for an automatic selection of the audio source. In presence of
Dante VoIP audio a message
Flow OK
is shown
o
IP: IP address of the Ethernet module
o
PC Link
: Connection status with DSP Studio. There’s three states:
Initializing
when IP is configuring,
Waiting
for no connection
established and
Link OK
when the unit achieves successful connection
with DSPStudio
+6
0
-6
-12
-18
-24
Input:
AUTO
IP: 192.168.0.9
PC Link:
Waiting
P 1: HPF60 Flat
Temperature: 37
o
C
Input dB
A
B
C
D
