X212AFD
July 2021
11
Amate Audio
3.3 Line source with X218WFD extension on floor and upper frequency limit
of the subwoofer at 60 Hz.
The X218WFD provides an extension of the bandwidth in the low end, down to 25 Hz
.
The system operates over the nominal bandwidth 25 Hz
–
18 kHz, -10dB.
Model: X212AFD
Preset: [HPF60 FLAT] [HPF60 FLAT]
Model: X218WFD
Preset: [LPF60 X212]
[LPF60 X212]
The minimum number of cabinets to be used as a line source system is 6
cabinets. We do not recommended to use less than 6 cabinets per side.
The optimum number of cabinets per side would be from 8-9 cabinets to
up.
Place the subwoofers side by side. If not possible, the maximum distance
between two adjacent acoustic centres must be 2.8m when the upper
frequency limit of the subwoofer is at 60 Hz.
SYSTEM ALIGNMENT
The system is pre-aligned from the factory. Do not forget to add the
geometric delay depending on the configuration used.
