Amano PIX-28, Руководство по эксплуатации

Страница: 15 / 32

Amano PIX-28
11
Time (Clock) Setting
1. Enter the Program Mode and press the CHANGE
button. When
Cioc
P2
,
flashes in the display, press
the ENTER button.
Note: Seconds are fixed at 00 and cannot be
changed. The seconds will start incrementing from
00 when the ENTER button is pressed.
2. Press the CHANGE button until the correct minute
appears, then press the ENTER button.
3. Press the CHANGE button until the correct hour
and time of day appears, then press the ENTER
button.
4. When the display flashes the correct time, press
the ENTER button.
5. When the display flashes
Cioc
P2
,
press the
CHANGE button to move to the Daylight Saving
Time Setting or press the PROGRAM button to
exit the Program Mode.
Daylight Saving Time Disable/Enable
Note: When this setting is set to ON, the clock’s time will automatically
change for DST. When this setting is set to OFF, the clock’s time will
not change for DST. The dates to begin and end DST are set in the
Other Options Menu (See Page 13).
1. Enter the Program Mode and press the CHANGE
button until
dLS
P3
flashes in the display. Press
the ENTER button.
2. Press the CHANGE button to alternate between
On and Off.
3. When the display flashes the correct setting,
press the ENTER button.
4. When the display flashes
dLS
P3
,
press the
CHANGE button to move to the Quick Set-Up
Code setting or press the PROGRAM button to
exit the Program Mode.