Amano PIX-28, Руководство по эксплуатации

Страница: 13 / 32

Amano PIX-28
9
Chapter 3: Program Mode
Unlock and remove the cover. Locate the PROGRAM , CHANGE ,
ENTER , HOUR , and MINUTE buttons on top of the clock.
The
PROGRAM button is used to enter and exit the Program Mode. If a
program step is in the process of being changed when this button is
pushed, the new information will not be saved.
The
CHANGE button is used to change the information on the display.
The
ENTER button is used to accept the information shown on the
display and save it in memory or to enter a program mode.
The
HOUR button is used to advance the hour in the display by
increments of 1.
The
MINUTE button is used to advance the minutes in the display by
increments of 1.
The
RESET button is located on the rear of the clock, underneath the
unit. Pressing this button will clear any jams or errors.