Amano PIX-28, Руководство по эксплуатации

Страница: 29 / 32

Amano PIX-28
25
Chapter 4: Maintenance and Troubleshooting
Ribbon Cartridge Replacement
1. Remove the cover.
2. Pull the two release tabs upward.
3. While holding the release tabs in an
upward position, pull the ribbon cassette
out of the cradle.
Note: If the print mechanism is down and a piece of paper cannot be
inserted, press the RESET button to move the carriage up. This
will make the ribbon installation easier.
4. Insert a new ribbon between the ribbon
guide and the printer head as shown. Be
sure to mount the ribbon between the
printer head and ribbon guide as arrows
illustrate.
5. Turn the knob on the cassette clockwise
one turn to take up any slack in the
ribbon.
6. Replace the cover.
7. Reset the INK indicator by pressing the
CHANGE and ENTER buttons at the
same time.
8. Check the printing quality to confirm that you have installed the
ribbon properly.