Amano PIX-21, Руководство по эксплуатации

Страница: 5 / 20

Page 3
Amano Cincinnati, Inc.
PIX-21 Operation Manual
Mounting the Clock
1. Remove the mounting bracket from the clock by pushing forward on the top
tabs “A” and then pushing the tabs down “B” (See below).
2. If you are using the Mobile
Mounting Unit gooseneck and
special mounting bracket (P/N
AJR-208800), mount the
gooseneck to the vehicle in
the desired location first.
Mount the special mounting
bracket to the gooseneck
using the three #M5 acorn
nuts and washers provided.
You may discard the original
PIX mounting bracket if you
wish.
3. If you are not using the Mobile Mounting Unit, securely mount the PIX
mounting bracket on the wall using three #10 wood screws or equivalent.
4.
Refer to the illustration below to plug the appropriate power cord into the
bottom rear of the clock.
If you are using the DC power cord, locate the rubber grommet on the power
cord and install the grommet into the notch in the housing. The power cord
will exit the clock through the opening on the bottom. Refer to page 15 for
more information about using the DC power cord.