Amano PIX-21, Руководство по эксплуатации

Страница: 11 / 20

Page 9
Amano Cincinnati, Inc.
PIX-21 Operation Manual
Normal Program Mode
1. Plug In the Power Cord
2. The Reset Button
Note: To exit the
programming mode and
return to the time display,
press the RESET button at
any time.
The RESET Button is located
in the lower right corner on
the bottom of the clock
3. Entering the Normal Program Mode
These instructions must be followed in the order given. The following steps
describe how to get into and use the Normal Program mode.
Note: The code (password) is printed inside the top of the cover case: “
8088
”.
1. Press and hold down the RESET button.
2. While holding down the RESET button, press and
hold down the ENTER button.
3. While holding down the ENTER button, release the
RESET button.
4. When
Pro9
flashes in the display, release the ENTER
button
5. Press the ENTER button again.
6. Press the CHANGE button until the
8
appears in the
first position, then press the ENTER button.
7. Press the CHANGE button until the
0
appears in the
second position, then press the ENTER button.
8. Press the CHANGE button until the
8
appears in the
third position, then press the ENTER button.
9. Press the CHANGE button until the
8
appears in the
fourth position, then press the ENTER button.
10. When the display flashes
8088
, press the ENTER
button.