Amano PIX-21, Руководство по эксплуатации

Страница: 10 / 20

Page 8
PIX-21 Operation Manual Amano Cincinnati, Inc.
7. Setting the End Date of Daylight Saving Setting
Note : The government standard for DST is subject to change. Your clock is
factory set for correct DST based upon when it was manufactured, but any
revision to DST begin or end dates may require updating the system-set
DST calendar.
The steps below change the end date for DST. Updating the end date for
DST needs to be done just one time, since the clock’s rolling calendar
function will auto-calculate the end date for each year thereafter. To
change the begin date for DST, refer to the previous section.
1. When the display flashes , press the ENTER
button.
2. Press the CHANGE button until the correct year
appears, then press the ENTER button.
3. Press the CHANGE button until the correct month
appears, then press the ENTER button.
4. Press the CHANGE button until the correct date
appears, then press the ENTER button.
5. When the display flashes the correct year, month and
date, press the ENTER button.
6. When the display flashes , press the
CHANGE button to move to the end of the Program
Note: To disable the Daylight Saving Setting, set the beginning and ending date
to the same date.
8. Exit Program Mode
When the display flashes
End
, press the ENTER button to
exit the program mode.