32
How to Configure Breaks for Regular Employees
This section explains how to configure breaks for regular employees. (You can configure up to
four scheduled ("fixed") breaks a day for regular employees.)
・
You may not configure breaks so that they run back to back or overlap each other!
・
Also, you may not configure breaks so that they overlap Shift Beginning and End Times.
(See page 42 for details.)
1
Insert PROGRAMMING CARD FOR REGULAR EMPLOYEES #4.
・
The card is automatically scrolled to the #1
FIXED BREAK position.
2
Configure the #1 Fixed Break Time Zone.
・
Press HOUR + (button
②
) to increase the #1 Fixed Break
Beginning Time one hour at a time.
Select "----" if you don't wish to specify a #1 Fixed
Break Beginning Time.
・
Press (button
③
) to increase the #1 Fixed Break Beginning Time one minute
at a time.
・
Press HOUR + (button
④
) to increase the #1 Fixed Break End Time one hour at a time.
・
Press (button
⑤
) to increase the #1 Fixed Break End Time one minute at a
time.
Keep the corresponding button pressed to speed scroll.
3
Press NEXT (button
⑥
).
・
The #1 Fixed Break Beginning and End Times are
confirmed and the card is scrolled to the next setting
(#2 Fixed Break). (The card is automatically scrolled
to the #2 FIXED BREAK position.)
<To Set Multiple Breaks>
4
Repeat steps 2 and 3 for #2, #3 and/or #4 Fixed Breaks.
・
Press NEXT (button
⑥
) to scroll to the break you wish to configure and then repeat the instructions
from step 2 and 3 and then press button
⑥
to confirm the setting.
5
Press NEXT (button
⑥
) until the card is positioned to # 4 Fixed Break and then press END (button
⑥
) to exit.
・
The programming card is ejected and the current time is displayed.
Note
Not configured (default setting)
#1 Fixed
Break
Beginning
Time
#1 Fixed
Break End
Time
Note
Note