29
Example: Factory Setting
定 時
Day Change Time
1
2
3
4
21 22 23 24
17 18 19 20
13 14 15 16
Overtime Zone
Regular Hours Time Zone
5
6
7
8
9
10 11 12
Shift Beginning Time
Shift End Time
How to Adjust the Shift Beginning and End Times
This section explains how to adjust the Shift Beginning and End Times.
The Regular Hours Time Zone for regular employees is determined by the Shift Beginning and End
Times. If the Overtime Beginning Time isn't configured, then by default, the time from Shift End Time
to one minute before Day Change Time is treated as an Overtime Zone.
Factory Setting: Shift Beginning Time: 8:30, Shift End Time: 17:00
1
Insert PROGRAMMING CARD FOR REGULAR EMPLOYEES #3 and then
scroll to SHIFT SCHEDULE BEGINNING TIME / END TIME.
・
Insert the card and then press NEXT (button
⑥
).
2
Adjust the Shift Beginning and End Times.
・
Press HOUR + (button
②
) to increase the Shift Beginning
Time one hour at a time.
・
Press (button
③
) to increase the Shift Beginning
Time one minute at a time.
・
Press HOUR + (button
④
) to increase the Shift End Time
one hour at a time.
・
Press (button
⑤
) to increase the Shift End Time
one minute at a time.
Keep the corresponding button pressed to speed scroll.
3
Press NEXT (button
⑥
).
・
The Shift Beginning and End Times are confirmed and the card is scrolled to the next setting
(Overtime Beginning Time).
4
Press NEXT (button
⑥
) and then press END (button
⑥
) to exit.
・
The programming card is ejected and the current time is displayed.
Note
Beginning Time
End Time
Note
Day Change Time minus
1 minute