Troubleshooting
18
EN
Problem
Cause
Action
Burning or glazing.
Dull abrasive.
Replace abrasive.
Excessive sanding pressure.
Decrease sanding pressure setting.
(Fig. #16, page 15).
Too fine of an abrasive belt.
Use coarser abrasive.
Slow cutting.
Dull abrasive.
Replace abrasive.
Too fine of an abrasive belt.
Use a coarser abrasive belt.
Insufficient sanding pressure.
Increase sanding pressure setting.
(Fig. #16, page 15).
Waves on sanded surface.
Debris on wheels.
Remove and clean wheels.
Flat spot on tire(s).
Replace tires.
Chatter marks on sanded surface.
See Chatter Wave Prevention,
See Chatter Wave Prevention,
(Close evenly spaced ripples)
page 14.
page 14.
Difficult to actuate tension release
Debris interferes with mechanism
Blow out sanding chamber.
lever.
Remove
and
disassemble
mechanism. Clean out.
Worn sleeve bearing.
Replace.
Galled linkages.
Lubricate with spray lubricant.
Abrasive belt hunts (seeks).
Worn sleeve bearing.
Check for excessive play, replace.
High edges on drum.
Contact an authorized dealer
or
replace
the
drum.
Abrasive belt will not track.
Extreme difference in side-to-side
Replace abrasive belt.
length of belt.
High edge on drum .
Check several different abrasive
belts. Contact an authorized
dealer or replace the drum.
Abrasive belt tears along its
Debris built-up on (top) tension
Clean tension roller.
length. roller.
Содержание 07104
