Amana W10316638A Скачать руководство пользователя страница 5

Страница: 5 / 32

NOTE: Tighten the nut by hand. Then tighten it with a wrench
two more turns. Do not overtighten.

4. Turn shutoff valve ON.
5. Check for leaks. Tighten any nuts or connections (including

connections at the valve) that leak.

Style 3

1. Unplug refrigerator or disconnect power.
2. Remove and discard the cap from the gray water tube.

3. Using a compression nut and sleeve, attach the copper tube

to the water inlet.

4. Once secured, tighten the compression nut. Do not

overtighten.

5. Check the connection by pulling on the copper tubing. Turn on

water supply to refrigerator. Check for leaks. Tighten any nuts
or connections that leak.

Complete the Installation

1. Plug into a grounded 3 prong outlet.
2. Flush the water system. See “Prepare the Water System” or

“Water and Ice Dispensers.”

NOTE: Allow 24 hours to produce the first batch of ice. Allow
3 days to completely fill ice container.

REFRIGERATOR USE

Using the Controls

For your convenience, your refrigerator controls are preset at the
factory. When you first install your refrigerator, make sure that the
controls are still preset. The Refrigerator Control and the Freezer
Control should both be set to the “mid-settings.”

IMPORTANT:

■

Your product will not cool when the REFRIGERATOR Control
is set to OFF.

■

The Refrigerator Control adjusts the refrigerator compartment
temperature. The Freezer Control adjusts the freezer
compartment temperature.

■

Settings to the left of the mid-setting make the temperature
less cold. Settings to the right of the mid-setting make the
temperature colder.

■

Wait 24 hours before you put food into the refrigerator. If you
add food before the refrigerator has cooled completely, your
food may spoil.

NOTE: Adjusting the Refrigerator and Freezer Controls to a higher
(colder) than recommended setting will not cool the
compartments any faster.

Adjusting Controls

NOTE: Give the refrigerator time to cool down completely before
adding food. It is best to wait 24 hours before you put food into
the refrigerator. The settings indicated in the previous section
should be correct for normal household refrigerator usage. The
controls are set correctly when milk or juice is as cold as you like
and when ice cream is firm.

■

Slide the control one setting to the right to make the
compartment colder.

■

Slide the control one setting to the left to make it less cold.

If you need to adjust temperatures in the refrigerator or freezer,
use the settings listed in the chart below as a guide. Wait at least
24 hours between adjustments.

Disabling Sounds

■

To turn off all dispenser and control sounds, press and hold
ICE and FILTER at the same time for 3 seconds.

■

To turn all sounds back on, press and hold ICE and FILTER at
the same time for 3 seconds again.

A. Refrigerator water tubing
B. Nut (provided)

C. Bulb
D. Coupling (purchased)

E. Ferrule (purchased)

F. Nut (purchased)

G. Household water line

A. Cap
B. Inlet