8
1/2" higher
than frame
Storm
window
frame
Wood
Stool
•
These instructions are for a standard double-
hung window. You will need to modify them for
other types of windows.
•
The air conditioner can be installed without the
accordion panels if needed to fit in a narrow
window. See the window opening dimensions.
•
All supporting parts must be secured to firm
wood, masonry or metal.
•
The electrical outlet must be within reach of the
power cord.
1
WINDOW REQUIREMENTS
•
A storm window frame will not allow the air
conditioner to tilt toward the outside, and will
keep it from draining properly.
To adjust for this, attach a piece of wood to
the stool.
WOOD PIECES
WIDTH: 2"
LENGTH:
Long enough to fit inside the window
frame.
THICKNESS :
To determine the thickness, place a
piece of wood on the stool to make it 1/2" higher
than the top of the storm window frame.
Attach securely with nails or screws
provided by the installer.
2
STORM WINDOW REQUIREMENTS
Remove the locking screw and locking
bracket from the lower frame. Save to
reinstall later.
Remove the ground screw and save to
reinstall later.
4
PREPARE THE WINDOW
3
REMOVE THE AIR CONDITIONER
FROM THE CASE
A
B
Cut the window sash seal to the proper
length. Peel off the backing and attach the
seal to the underside of the window sash.
Installation Instructions
C
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
Remove the ground screw and save to reinstall later.
Remove shipping screws
(if present) and discard
Installation Instructions
