Amana Room Air Conditioner & Heat Pump Скачать руководство пользователя страница 2

2

WARNING

WARNING

HIGH TEMPERATURE STRESS HAZARD

This room air conditioner is not meant to provide
unattended cooling or life support for persons or
animals that are unable to react to failure of the
product.

The failure of an unattended air conditioner may
result in extreme heat in the conditioned space
causing overheating or death or persons or
animals.

Precautions must be taken to ward off or guard
against such an occurrence.

WARNING

Unpacking

Unpack and visually inspect the unit.  Report any damage to

the delivering carrier immediately.  Remove and discard all

packing material.

Do NOT operate unit with shipping foam
blocks in place.  Always remove prior to
running unit.

WARNING

On some models the air conditioner front and/or mounting kit

hardware may be packed separately.
Record the model, serial and manufacturing numbers of your

unit in the space provided below.  This information is found on

a nameplate visible after the front of the air conditioner has

been removed.  The rated voltage, amperage and capacity for

your specific model can also be found on this nameplate.

Read the warranty packaged with the unit.  Keep the warranty

and a copy of your sales receipt for future reference.  You may

also want to record in the space provided the date purchased

and the selling dealer.

OWNER'S PRODUCT IDENTIFICATION

MODEL NUMBER

SERIAL NUMBER

MANUFACTURING NUMBER

Owner's Name

Address

City

State

Zip

        /        /   

Date of Purchase

Authorized Dealer

Address

City

State

Zip

(       )

Phone Number

To avoid death, personal injury or property
damage due to electrical shock:

• 

 Observe all local codes and ordinances.

  Disconnect electrical power to unit before servicing.

•  

Ground appliance properly.

•  

Check with a qualified electrician if you are not

    sure this appliance is properly grounded.

•  

DO NOT ground to gas line.

•  

DO NOT ground to cold water pipe if pipe is

    interrupted by plastic, non-metallic gaskets, or
    other insulating (non-conducting) materials.

•  

DO NOT modify plug on power cord. If plug

    does not fit electrical outlet, have proper outlet
    installed by qualified electrician.

•  

DO NOT have a fuse in the neutral or ground

    circuit. A fuse in the neutral or ground circuit
    could result in an electrical shock.

•  

DO NOT use an extension cord with this appliance.

•  

DO NOT use an adapter plug with this appliance.

•  

DO NOT pinch power cord.

  DO NOT REMOVE warning tag from power cord.

WARNING

Electrical Requirements

Grounding Instructions

This appliance is equipped with a three-prong grounding plug

for protection against possible shock hazards.  If a two-prong

Содержание Room Air Conditioner & Heat Pump





















Отзывы: