Installation Instructions
RS4110001 Rev. 0
7
Preparing for Installation
Installation Tips
For wood-frame casement windows: It may be
necessary to construct a frame, using at least 1-inch
thick wood, with a 15 1/2-inch wide opening.
For brick or cement building construction: It may be
necessary to provide a wood stool strip under the air
conditioner for mounting purposes.
Tools Required
•
Flat-head screwdriver
•
Phillips-head screwdriver
•
Carpenter’s level
•
Tape measure
•
Fine tooth saw
•
Electric or hand drill
•
1/8-inch drill bit
•
9/64-inch drill bit
WARNING
!
To avoid risk of personal injury or product damage
follow the following precautions.
•
Because this air conditioner weighs about 88 to 105
pounds, it is recommended that you have someone
help you when you install your new unit, and that
you both use proper lifting techniques. Inspect the
condition of the window where the unit will be
installed. Be sure it will support the weight of the
unit.
•
This appliance must be installed according to all
applicable codes and ordinances.
•
Handle the air conditioner with care. AVOID the
sharp metal fins on the front and rear coils.
•
Make sure your air conditioner does not fall during
installation.
•
Do not use the water collected in the unit for
drinking purposes. It is not sanitary.
Installation Kit Contents:
Verify all parts are present.
1
Platform (1)
2
Support brace (1)
3
Adjustment bolt (1)
4
Hex flange nut
1/4
(1)
5
Track seal (1)
6
Side channel seal (1)
7
Foam seal strip/Sash seal
8
Safety bracket (1)
9
Screw
#10x2 1/2
flat-head (2),
10
Screw
#10x1 3/4
pan-head (2),
11
Screw
#10x1
pan-head (2)
12
Screw
#8x3/4
pan-head (6)
13
Screw
#8-32x3/4
self-threading (7)
14
Window locking bracket (1)
15
Plastic window panel (1)
16
Side channel (2)
17
Screw - #8x3/8
truss-head (6)
3
9, 10, 11
8
13
5
7
6
15
14
16
17
12
2
1
4
NOTE: Use the scale below to measure the length of
screws. The scale will come in handy when
separating screws for installation.
