Operating Instructions
RS4110001 Rev. 0
14
Using Air Conditioner
NOTE: If unit is turned off, wait 3 minutes before
restarting. This will allows pressure inside the
compressor to equalize. Failure to follow these
instructions may cause inefficient operation.
WARNING
!
To avoid risk of fire, electric shock, or personal injury,
read IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
To begin operating air conditioner, follow these
steps:
1. Plug in air conditioner.
NOTE: To avoid electrical hazards, do not use an
extension cord or adapter plug.
2. Place exhaust vent to
CLOSED
position.
3. Turn TEMPERATURE CONTROL knob to highest
number setting or
COLDER
setting.
4. Turn FAN CONTROL knob to
COOL MODE
HIGH
setting.
5. Adjust louvers for comfortable air circulation.
6. Once room has cooled, turn temperature control knob
to setting more comfortable.
Air Conditioner Features
Controls featured in this manual represent 82VS and
102VS models.
Fan Control Knob
Turns unit on, off, and allows you to select either cooling
air, or allows air to circulating at existing temperature.
Operate FAN ONLY and COOL MODE according to the
following suggestions:
Mode
Function
OFF
Turns unit off.
HIGH COOL
Maximum cooling speed, start unit in
this mode.
MED COOL
Moderate cooling speed.
LOW COOL
Minimum cooling speed.
HIGH FAN
Maximum air circulation speed.
MED FAN
Moderate air circulation speed.
LOW FAN
Minimum Air circulation speed.
LOW
MED
HIGH
FAN CONTROL
HIGH
MED
LOW
OFF
FAN
ONLY
COOL
MODE
Temperature Control Knob
When any COOL MODE setting is selected, thermostat
controls the amount of cooling by automatically turning
cooling compressor on and off in response to room
temperature.
Turn TEMPERATURE CONTROL knob to highest
number for the coldest cooling setting. Once room
reaches desired temperature, adjust TEMPERATURE
CONTROL knob to desired number comfortable for
cooling room.
ECONOMY
SETTINGS
1
2
3
4
5
6
7
8
COL
D
ER
TEMPERATURE CONTROL
NOTE: Higher numbers provide lower room
temperatures. Lower numbers provide higher
room temperatures.
Vent Control Knob
Allows unit to either recirculate inside air
CLOSED
, or
exhaust air to the outside
EXHAUST
.
•
CLOSED
position is used when maximum cooling is
desired. It may also be used for air recirculation
without cooling when air conditioner is turned to FAN
ONLY position.
•
EXHAUST
position removes stale air from the room,
and exhausts it to the outside. Fresh air is drawn into
the room through normal air passages found in
homes.
•
The
EXHAUST
or
CLOSED
position can be used with
any fan selection.
VENT CONTROL
CLOSED
EXHAUST
