SS-DRYPTAC www.amana-ptac.com
3
2
www.amana-ptac.com SS-DRYPTAC
P
roduct
S
PecificationS
P
roduct
S
PecificationS
W
eB
-B
aSed
, r
eal
-T
ime
m
oniToring
a
mana
®
B
rand
d
igi
S
marT
™
c
onTroller
:
All of the PTACs in the building can be managed through a single interface on a PC.
FEATURES INCLUDE: Full unit details for every PTAC, visible from the front desk or home office, automatic emails for PTAC
maintenance, ability to change all settings on the unit, and enhanced diagnostics. Monitor up to 170 PTACs, WIRELESSLY, with one
controller. Additional controllers can expand the network for additional rooms/properties.
> System Verification
> Global Setbacks
> EMS Configuration
> Site Statistics
> Battery Notices
> Email Reporting
> Unit Health
> Unit Code Alerts
Temp Limiting – Each PTAC
can be configured with a heat-
ing and cooling temperature
set-point limit.
Setbacks – Once a room is declared unoccupied by the occupancy sensor, the PTAC progresses through three different temperature
setbacks, configured as three degree and time pairs (An example configuration is listed below).
1st: 2°, 30 mins – Setback the temp 2 degrees after 30 minutes
2nd: 4°, 1 hr – Setback the temp 2 more degrees after 30 more minutes
3rd: 8°, 3 hrs – Setback the temp 4 more degrees after 2 more hours
Unrented Set-Points – By integrating with your property's Front Desk System, the PTACs will adjust to specific set-points when no
longer identified as rented in the system.
