SS-DRYPTAC www.amana-ptac.com
5
4
www.amana-ptac.com SS-DRYPTAC
P
roduct
S
PecificationS
P
roduct
S
PecificationS
P
roducT
S
PecificaTionS
Notes
¹ MCA (Minimum Circuit Ampacity) ratings conform to the National Electric Code; however, local codes should apply.
² Minimum voltage on 230/208-volt models is 197 volts; maximum is 253 volts.
³ Overcurrent protection for all units without electric heaters is 15 amps. See heater performance for total MCA.
⁴ Heating capacity and efficiency based on unit operation without condensate pump; unit automatically switches to electric heat at approximately 24°F
outdoor ambient.
⁵ Total watts for 12,000 BTU/h models.
⁶ Specify two-digit heater kW size to complete model number.
⁷ Total amps for 12,000 BTU/h models.
⁸ R-410A refrigerant used in all systems.
⁹ All units meet or exceed ASHRAE 90.1 standards.
¹⁰ All units less than 250 volts have a Leak Current Detector Interrupter (LCDI) power cord and meet UL 484 standards.
¹¹ Refer to electric heat performance data for total MCA and recommended overcurrent protection. Amps and Watts notation refers to compressor only.
DRY
093G***XXX
DRY
094G***XXX
Voltage
230 / 208
265
Cooling Performance
Capacity (BTU/h)
8,800/8,600
8,800
Amps
4.6/4.7
4.3
Watts
785/770
785
EER
11.2/11.2
11.2
CFM (Cool/
Wet Coil)
High
290
290
Low
264
264
Dehumidification *
2.8
2.8
Heating Performance
Min. Circuit Amps
5.5
5.0
Watts
BTU/h
CFM (Dry Coil)
High
310
310
Low
282
282
Fresh Air, CFM (Fan Only)
65*
65*
Net Weight (lbs.)
98
102
Ship Weight (lbs.)
113
117
* (Pints/Hr. @ High/Low Speed)
^ Approximately 95 CFM with optional power vent kit. Actual vent CFM performance will
vary due to application and installation conditions.
