4
Using the Freezer Controls
If These Features
are Different from
Yours
These examples are intended
to show the variety of features that are
available in the product line. If your
freezer does not have all the options
that are shown, it is not a mistake.
The information provided applies to
all of the models in the product line.
Temperature Monitor
Alarm
Temperature monitor alarm
is located next to the
temperature control knob.
Alarm is controlled by a
three position switch.
•
0 stops alarm from sounding when
the freezer is warm. This setting can
be used when defrosting or when
first plugging in the freezer.
•
ü
sounds the alarm regardless of
temperature to verify alarm is
functioning and audible. Alarm
system should be tested at least
once a month.
•
1 turns the temperature monitor on
for normal freezer use. Remember
to turn switch to 1 after defrosting.
1
0
Temperature Control
The freezer temperature control uses a range of settings from
0 to 7. When set at zero the freezer is OFF—it does not cool or
maintain a cool temperature. Setting 1 is the warmest
temperature setting and setting 7 is the coldest.
If the freezer is laid on its side during shipping or transport, place
the freezer upright and wait 12 hours before plugging it in.
This prevents damage to the freezer.
When plugging in the freezer for the first time:
1.
Set freezer temperature setting to 4.
2.
Wait 3 to 6 hours.
3.
Add food.
4.
After 24 hours, adjust control as desired.
To adjust freezer temperature:
1.
Set household thermometer snugly between frozen packages.
• Thermometer can also be placed in a glass of vegetable oil placed in
freezer (vegetable oil will not freeze).
• Thermometer should be designed for use with freezer.
• Thermometer should read temperatures ranging from -5° to 50°F.
2.
Wait 5 to 8 hours.
3.
Check temperature.
• Temperature should read between 0° to 2° F.
• If temperature is not in range, adjust control only one number
at a time.
• If temperature needed adjustment, wait an additional 5 to 8 hours and
recheck temperature.
Temperature Control Knob
The temperature control knob is located on
the outside of the freezer cabinet on the
lower right side. To adjust the temperature
control, place a flat-bladed screwdriver or
coin into slot and turn to the desired
temperature.
To conserve energy:
•
Do not set controls colder than
necessary to maintain a temperature
range of 0° to 2°F.
•
Operate in normal room temperatures
away from heat sources and direct
sunlight.
•
Keep freezer full.
•
Keep door gaskets clean and pliable by
following the cleaning instruction in
Care
and Cleaning. Replace gaskets if worn.
1
3
4
0
5
7
2
6
4
1
7
