manualshive.com logo in svg

Amana ASE7000, Руководство по обслуживанию

Поделиться
Скачать
Amana ASE7000 Скачать руководство пользователя страница 47

A–11

RS2240003   Rev. 0

User Options

Changing user options

Options such as single or double pad programming, beep volume, and
maximum cooking time can be changed to suit individual preferences.

To change options READY must display without ITEM:
1.

Press hidden pad.
• Pad is unmarked.
• Nothing will be displayed when hidden pad is pressed.

2.

Press PROGRAM SAVE pad.
•

0P:

 displays. Oven is now in options mode.

3.

Press number pad that controls option to be changed.
• See table below for options.
• Current option will display.

4.

Press number pad again to change the option.
• Each time pad is pressed, option will change.
• Match code displayed with code for desired option.

5.

Press PROGRAM SAVE pad to save changes.
• To change additional options, repeat steps 3 and 4.
• Changes take affect after PROGRAM SAVE pad is pressed.
• Press STOP/RESET to return to READY, or open and close oven

door.

Didn’t like an option?

Factory settings are marked in bold.
To change the oven back to the factory
setting, simply select the option that is
marked in bold.

My changes weren’t saved.

In order for any changes to be saved, the
PROGRAM SAVE pad must be pressed
after selecting an option. Pressing the
STOP/RESET pad will not save
changes.

Numbered Pads

Display

Options (Factory Settings in Bold)

1

Preprogrammed Pads

OP:10

OP:11

Allows 10 (0-9) preprogrammed pads.

Allows 100 (00-99) preprogrammed pads.

2

Manual Time Entry

OP:20

OP:21

Manual time entry/cooking not allowed, reprogramming pads not allowed.

Manual time entry/cooking allowed, reprogramming pads allowed.

3

Reset to READY mode

OP:30

OP:31

Opening oven door does not reset oven back to ready mode.

Opening oven door resets the oven back to ready mode.

4

Keybeep

OP:40

OP:41

Keys do not beep when pressed (keybeep off).

Keys beep when pressed (keybeep on).

5

Keybeep Volume

OP:50

OP:51

OP:52

OP:53

Keybeep volume OFF.

Keybeep volume low.

Keybeep volume medium.

Keybeep volume high.

6

Food Done Signal

OP:60

OP:61

OP:62

OP:63

Food done signal is a continuous beep until reset by user.

Food done signal is a three second beep.

Food done signal is four beeps, continuous.

Food done signal is four beeps, four times.

7

Keypad Time Entry

OP:70

OP:71

OP:72

OP:73

Keypad time entry window is 15 seconds.

Keypad time entry window is 30 seconds.

Keypad time entry window is one minute.

Keypad time entry window is two minutes.

HIDDEN

PAD

Operating Instructions for DQ22HSI

Содержание ASE7000





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды