manualshive.com logo in svg

Amana ASE7000, Руководство по обслуживанию

Поделиться
Скачать
Amana ASE7000 Скачать руководство пользователя страница 45

A–9

RS2240003   Rev. 0

Microwave Cooking

Microwave cooking uses high
frequency energy waves to heat the
food. When cooking, microwave
energy causes food molecules to
move rapidly. This rapid movement
between the food molecules creates
heat, which cooks the food. POWER
displays when oven is generating
microwave energy for the current
cycle.

Manual Time Entry

To cook food using a specific entered time and power level.

1.

Open oven door and place food in oven. Close door.
•

READY 

displays. Fan and light will turn on.

•

ITEM 

flashes when keyboard can be set.

2.

Press TIME ENTRY pad.

•

0000 

displays.

•

STG

 displays with current cooking stage.

• If pad does not work, open and close oven door and try again.

3.

Enter cooking time by using the numbered pads.

4.

Press POWER LEVEL pad to change power level.
•

COOK LEVEL

 displays with the current power setting.

• If power level is set to high 

H

 displays.

• For a lower microwave power, press pads 1 (for 10%) through

9 (for 90%).

5.

If stage cooking is desired, press STAGE and repeat steps 2
through 4.
• As many as 4 different stages can be programmed.

6.

Press START pad.
• Oven operates and time counts down.

•

POWER

, 

COOK LEVEL

 and cooking time display.

7.

At end of cooking cycle oven beeps and shuts off. don

e

 displays.

Preprogrammed Pads

To cook food using pads preprogrammed with cooking sequences. All
pads come preprogrammed from the Amana factory.

NOTE: Your Dairy Queen

®

 boosting oven is pre-programmed at the

factory for double pad programming. All the necessary codes,
except bulk heating times for BBQ, are entered. The BBQ
heating times will vary depending on your supplier of BBQ.

1.

Open oven door and place food in oven. Close door.
•

READY 

displays. Fan and light will turn on.

•

ITEM 

flashes when keyboard can be set.

2.

Press desired pads.

3.

QTY

 displays.

• Enter quantity to cook.

4.

Oven begins to cook.
•

POWER

, 

COOK LEVEL

 and total cooking

time display as set for that pad.

• For additional cooking time, press

preprogrammed pad again.

5.

At end of cooking cycle oven beeps and shuts off. don

e

 displays.

Operating Instructions for DQ22HSI

Содержание ASE7000





















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды