Amana AGR5712BD Series, Руководство по обслуживанию, Страница: 68 / 69

C–6 16026785
© 2005 Maytag Services
Conversion Instructions, Non Self-Clean Models
l“‚‹ _’‹‚ `Œ‹“‚†Œ‹
Remove all oven racks.
NK _~ˆ‚ _’‹‚
a. Remove oven bottom (figure 2).
b. Remove screw from the front of the bake burner.
c. Remove the bake burner from the orifice fitting.
`^rqflkW
The igniter is fragile. Take care not to
damage it.
d. Gently lay the bake burner in the bottom of the
range.
e. Remove the bake orifice hood with a
ò ²
(12.7 mm)
socket wrench counter-clockwise.
f. Place the black-colored orifice stamped .0512 on the
fitting turning it clockwise by hand approximately one
turn. Tighten the orifice hood with a
ò ² PP
socket wrench clockwise approximately 2
ò
turns.
g. Replace the bake burner.
h. Replace the oven bottom.
2ULILFH &RQYHUVLRQ
cfdrob O
cfdrob P
p’ƒ~€‚ _’‹‚ `Œ‹“‚†Œ‹
1. Remove all grates.
2. Mark ignitor location on the main top with a pencil. This
mark on the main top is used as a reference point
when replacing the burner assembly to ensure that the
burner is tightened to its original position.
3. Place burner wrench (part no. 8312D075-60, available
from the dealer or authorized service agency) over the
surface burner assembly with the ignitor positioned
inside the gap in the wrench ring (figure 3). This
prevents the ignitor from being damaged when the
wrench grips the burner assembly. Rotate the burner
assembly approximately one-eighth turn
counter-clockwise and lift from the main top.
CLIP
To convert this unit to LP gas from Natural gas will require the exchange of orifice hoods.
fjmloq^kq
:
Save all natural orifice hoods that are removed.
4. Remove the surface burner orifice hood with a
ò ²
(12.7
mm) socket wrench counter-clockwise.
fjmloq^kq
: Save all natural orifice hoods that are
removed.