Amana AGR5712BD Series, Руководство по обслуживанию, Страница: 21 / 69

Testing Procedures
!
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power and gas to range before servicing,
unless testing requires power and/or gas.
© 2005 Maytag Services
16026785 21
NSC Control Diagnostic Code Checking
Code Description When Checked Detection
1c1c Shorted key Always 1 minute
1c31 Cancel key circuit problem Always 1 minute
1c4c Micro communication failure Serial communications 5 tries
1c5c Vcc or ground Cook active 1 minute
1c6c EEPROM error Cook active 5 tries
1c7c Control not calibrated Always 5 seconds
1c8c Cooking program error Cook active 5 tries
1d11 Runaway temp (650° F) Always 5 seconds
3d11 Sensor open Cook active 5 seconds
3d21 Sensor shorted Cook active 5 seconds
NSC Control Diagnostic Code Handling
Code Measurable What is Displayed Action Taken By Control
1c1c Keypress Nothing
Disables audible for affected key depression
Disables all outputs
1, 2
Disables lights and timers
1c31 Cancel key improper value Nothing Disables all outputs
1
1c4c Checksum invalid Nothing Disables all outputs
1
1c5c Vcc/ground at testpoint Nothing No action
1c6c EEPROM error Nothing Disables all outputs
1
1c7c Calibration value out of range Nothing No action
1d11 Sensor resistance > 2218 Ohms Nothing Return to idle; disables all outputs
1
3d11 Sensor resistance > Infinite Ohms
BAKE flashes
3
Disables all cooking functions
3d21 Sensor resistance > 0 Ohms
BAKE flashes
3
Disables all cooking functions
NSC CONTROL NOTES:
1
"Action Taken" applies as long as the condition exists. If the condition goes away, the control recovers.
2
If there is a cook function or timer active, the function continues. The user cannot edit the function, and [Cancel] will cancel the cook
mode.
3
Flash rate: 0.2 seconds on, 0.1 second off. Pressing any key will clear the display until the fault clears and is re-triggered.