Pega 367 with Fanuc 04PC User Pre-installation Guide
©Amada America, Inc.
Print Date 03/07/2001 Revision 4.0
This document available on the World Wide Web at http://www.amada.com
Page 28 of 35
Step 5
Fill each of the Anchor Rod holes to within 2 inches of the floor surface
with the Adhesive compound. Do not overfill.
Existing Floor
Step 6
Attach the hex nut and flat washer on the Anchor Rod and place the
Anchor Rod into the drilled hole.
Using a twisting motion to move the Anchor Rod through the epoxy
compound, seat the flat washer and hex nut against the top of the
machine foot.
Existing Floor
Step 7
Step 8.
Allow the Adhesive to harden for 24 hours.
Tighten the 4 hex nuts.
Existing Floor
