Pega 367 with Fanuc 04PC User Pre-installation Guide
©Amada America, Inc.
Print Date 03/07/2001 Revision 4.0
This document available on the World Wide Web at http://www.amada.com
Page 12 of 35
Supply Requirements - Pneumatic
Pega 367
80 psi @ 8.8 ft³/min.
Optional Equipment
MP1225 Loader
75 psi @ 31.8 ft
3
/min.
Installing the Pneumatic Supply
The Pega 367 requires connection to a compressed air system by
hose or pipe. The compressed air must be clean and dry.
Please note the following:
!
The minimum pipe inside diameter is ½".
!
The air pressure required is 80 psi.
!
The air volume required is 8.8 ft³/min..
!
The air inlet is approximately 16" above the floor level at the rear of
the Pega 367
For the location of required air supplies for optional equipment,
please see the installation guides for the specific equipment
