DELTA TAU WORKSTATION
990-828
16
Application Options (SETUP):
Motion (F1):
Not to be confused with the
Motion Options
button, this menu allows the
enabling and disabling of axes as well as dictates the current
Program
Execution Mode,
in Hardware Panel Control or Software Control
.
Position Based Firing - select the Position Based Firing drop down boxes to
configure the mounting of the Focus Head and the Rotary Axis. The corrected
mounting position of the Focus Head and Rotary Axis is needed to be selected
for the computation of distance where each shot to be fired when executing the
Position Based Firing features.
Focus Head – Fixed, About X, About Y, About Z. Only Fixed and About
Y are currently supported.
Rotary Axis – About X, About Y, About Z. If rotary axis is rotating about
X or about Y, the center location of shaft/rotary needs to be determined
and PSET as Z=0.
Hardware Panel – Allows Program to be control on hardware panel. If
changes are made only to the
Hardware Panel
check box you do not need to
Save Changes
Содержание Delta
Страница 33: ...DELTA TAU WORKSTATION 990 828 29 ...
