alzaTools AT-CBCS20V, Руководство пользователя

Страница: 12 / 72

12 ENGLISH
REMOVING AND INSERTING THE BATTERY
• Press the battery lock button (23) and slide out the battery (24) (Fig. A).
• Insert the charged battery (24) into the battery installation slot (14) in the main handle socket (13);
you should hear a click as soon as the battery lock button (23) engages.
BATTERY CHARGE LEVEL INDICATION
The battery is fitted with a battery status indicator (3 LEDs) (28). To check the battery level, press the
battery level indicator button (27) (Fig. C). If all LEDs are lit, the battery charge is high. When two
LEDs are lit, the battery is partially discharged. If only one LED is lit, the battery is flat and must be
recharged.
ADJUSTING THE CUTTING DEPTH
The depth of the cut at right angles can be adjusted from 0 to 51 mm.
• Release the depth of the cut lock lever (15).
• Set the required depth of cut (use the scale).
• Secure the depth of cut locking lever (15) (Fig. D).
INSTALLING THE EDGE GUIDE
The edge guide can be installed on the left or right side of the device base.
• Loosen the edge guide locking screw (20).
• Insert the edge guide into the holes in the base (16), set the required distance using the scale and
fix it by tightening the edge guide locking screws (20) (Fig. E).
The edge guide should face downwards.
The edge guide (21) can also be used to cut bevels at angles from 0° to 45°.
Never put your hands or fingers behind the saw when in operation. If recoil occurs, the saw can fall
on your hands causing serious injury.
MOVEMENT OF THE LOWER COVERS
As soon as the blade is embedded in the material, the lower protective cover (11) of the cutting blade
(8) is automatically pushed away. To move it manually, press the bottom cover lever (5).
DUST EXTRACTION
The circular saw is equipped with a dust extraction outlet (1), which extracts the sawdust generated
during cutting.
OPERATION/SETTING
TURNING ON/OFF
When starting, hold the saw with both hands as engine torque can cause the power tool to rotate out
of control.
Remember that the rotating parts of the saw rotate for some time even after the machine has been
switched off.
The device is fitted with a switch that protects against accidental start-up. The safety switch is located
on both sides of the tool body.
Switching on
• Press and hold one of the switch lock buttons (3) (Fig. F).
• Press the on/off button (4) (Fig. G).
OPERATION