6
#
Description
1
Light
2
Egg tray
3
Bottle rack
4
Refrigerator glass shelf
5
Salad crisper
6
Upper freezer drawer
7
Freezer room glass shelf
8
Bottom freezer drawer
9
Adjustable feet
10
Water tank
11
Crisper cover
12
Bottom bottle rack
13
Fresh-keeping lamp
Due to technological innovation, the descriptions of the product in this manual may not be completely
consistent with your refrigerator. Details are in accordance with the material item.
Preparations for Use
Installation location
•
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less hot air. Do not
locate the refrigerator near a heat source such as cooker, boiler, and avoid it from direct sunlight, thus
guaranteeing the refrigeration effect while saving energy consumption. Do not locate the refrigerator in the
damp place, so as to prevent the refrigerator from rusting and leaking electricity. The result of the total
space of the room in which the refrigerator is installed being divided by the refrigerant charge amount of
the refrigerator shall not be less than 8 g/ M
3
.
Note: The amount of refrigerant charged for the refrigerator can be found on the nameplate.
•
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least
30mm
of free space
should be spared at the top side, more than 100mm on both sides, and above 50mm at the back side of the
refrigerator.
。
Dimensions in mm
W
D
H
A
B
C(°)
E
F
785
717
1815
1274
1063
125
50
100
Note: Figure 1, Figure 2 only as a product space demand size schematic diagram.
•
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable, or else, it will give rise to vibration
and noise. When the refrigerator is placed on such flooring materials as carpet, straw mat, polyvinyl
chloride, the solid backing plates should be applied underneath the refrigerator, so as to prevent colour
change due to heat dissipation.
Unobstructed ventilation shall be maintained around the appliance or in an embedded structure.
