12
•
Installation
Do not cover or block the vents or grilles of your appliance. When you are out for a long time
o
If the appliance will not be used for several months, turn it off first, and then unplug the plug
from the wall outlet.
o
Take out all foods.
o
Clean and dry the interior thoroughly. To prevent odour and mold growth, leave the door ajar:
block it open or have the door removed if necessary.
o
Keep the cleaned appliance in a dry, ventilated place and away from the heat source, place the
appliance smoothly, and do not place heavy objects on top of it.
o
The unit should not be accessible to child’s play.
Maintenance and Cleaning
Before cleaning, unplug the power plug first; Do not plug in or plug out the plug with wet hand,
because there is a risk of electric shock and injury. Do not spill water directly on the refrigerator, to avoid
rust, electricity leakage and accidents. Do not stretch your hands into the bottom of the refrigerator, since
you might be scratched by sharp metal corners.
Internal cleaning and external cleaning
The food residuals in the refrigerator are liable to produce bad odor, so the refrigerator must be cleaned
regularly. The fresh food compartment is usually cleaned once a month.
Remove all shelves, crisper box, bottle racks, cover board, and drawers etc., and clean them with a soft
towel or sponge dipped in warm water or neutral detergent.
Clear off the dusts accumulated on the rear panel and side plates of the refrigerator often.
After using detergent, be sure to rinse it with clean water, and then wipe it dry.
Do not use bristle brush, steel wire brush, detergent, soap powder, alkaline detergent, benzene,
gasoline, acid, hot water and other corrosive or soluble items to cleanse the cabinet surface, door gasket,
plastic decorative parts, etc., so as to avoid damage.
Carefully wipe dry the door gasket, clean the groove using a wooden chopstick wrapped with cotton string.
After the cleaning, fix the four corners of the door gasket first, and then embed it segment by segment into
the door groove.
Interruption of power supply or failure of the refrigerating system
•
Take care of the frozen foods in the event of an extended non-running of the refrigerating appliance
(such as interruption of power supply or failure of the refrigerating system).
•
Try to open the refrigerator door as less as possible, in this way can food safely and freshly kept for
hours even in hot summer.
•
If you get the power outage notice in advance
：
o
Adjust the thermostat knob to the high mode an hour in advance, so that foods get fully frozen
(Do not store new food during this time!). Restore the temperature mode to the original setting
when power supply becomes normal in a timely manner.
o
You can also make ice with a watertight container and put it in the upper part of the freezer, so
as to extend the time for fresh food to be stored.
Note: Once the refrigerator is used, you’d better use it continuously; and under normal circumstance,
do not stop its use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long
service life. In case of any abnormality, please contact the after-sales personnel for visiting service. The
lamps can only be replaced by the manufacturer, together with a part of the appliance.
Lamp type: LED light
Energy efficiency level: F
Safety-check after maintenance
•
Is the power cord broken or damaged?
•
Is the power plug firmly inserted into the socket?
•
Is the power plug abnormally overheating?
