alza Tools AT-CHP20V, Руководство пользователя

Страница: 7 / 32

7 ENGLISH
REMOVING AND INSERTING THE BATTERY
Press the battery lock button and slide out the battery.
Insert the charged battery into the adapter holder; it should click when the battery locks.
OPERATION/SETTING
“IGHT TURNING ON/OFF
Activation
– press the power button(3).
Deactivation
– press the power button again (3).
USB ADAPTER
The USB adapter allows you to charge external devices (e.g. phone, mp3 player) via the USB port.
Follow the device manufacturer's instructions when charging an external device.
ADAPTER USB PORT CHARGING
Connect the USB cable to the external device.
• Connect the USB cable to the USB port (6) in the adapter.
• Press the button to activate/deactivate the USB port (4). The USB port is activated, which is sig-
nalled by the indicator light (5) lighting up and starts charging the connected device (Fig. D).
• To deactivate the USB port (and stop charging), press the USB port activate/ deactivate button (4)
again. Signal lamp (5) is off.
If the USB port is activated and no USB charging device is connected, the USB port will automatically
deactivate after approximately 60 seconds.
If the battery level is too low, charging may stop automatically (the USB port will be deactivated).
OPERATION AND MAINTENANCE
Remove the battery from the device before performing any related activities such as installation,
adjustment, repair, and maintenance.
It is recommended to clean the device after each use.
• Do not use water or any other liquid for cleaning.
• Clean the tool with a dry cloth.
• Do not use any cleaning agents or solvents as they can damage the plastic parts.
• Always store tools in a dry place, out of reach of children.
• Store equipment with the battery removed.
OPERATION