Step 12.
Re-install the Tilt Servo back to original
position and secure with the M3 Screws and
Nuts.
Step 13.
Ensure the Tilt Servo gear is fully contact
with Tilt Main gear without any gap between
the gears for stable operation.
CG Adjustment Completed
(Adjust the CG again once you have
change the camera or lens for better and
stable operation.)
Step 14.
Re-install the Roll Servo back to original
position and secure with the M3 Screws and
Nuts. Ensure the Roll Servo gear is fully
contact with Roll Main gear without any gap
between the gears for stable operation.
Page 22
