Step 7.
Install the
O-ring Damping System
onto the
Lower Main Frame of Streak 1000 using 2pcs
M3x10mm Screws and Self-Lock Nuts.
Step 8.
Back view of the O-ring Damping System.
Step 9.
Repeat step 6-8 to install the rest of Damping
System.
Step 10.
Notice the mounting holes on the
O-ring
Damping System
which will be connected
with
X-Mounting Frame
.
Step 11.
Notice the mounting holes on the
X-
Mounting Frame
which will be connected
with
the O-ring System
.
Step 12.
Install the Lensman-X Gimbal to the
O-ring
Damping System
which is mounted on the
Streak 1000 using 8pcs M3x10mm Screws.
(
Apply little amount of Thread Locker to the
screws before installation.)
Page 15
