TAS12-EDM & TAS12P-EDM Installation Instructions
Page 18
For Assistance: [email protected] +1 (909) 591-8431 PUD4005R1-0
Validate RFID Media (Optional on TAS12P-EDM only)
The RFID reader is located under the blackout pad.
1. To scan an RFID card or wristband, position the media in
the center of the blackout pad [Figure 18]. The read range
of RFID media varies from .5” – 2”, so the best practice
is to touch the RFID media in the center of the pad. The
reader will beep when the RFID media has been read.
After reading, the RFID data is sent to the GateLink10
server for validation.
• When validated, a chime will sound, the "PRINTING"
graphic will display on the TAS12 screen, and the
ticket(s) will print and deposit at the printer bezel
[Figure 19].
• When validation fails, an "INVALID SCAN" graphic
will display on the TAS12 screen and an alert will
sound.
2. Scan the printed ticket by placing the barcode on the
blackout pad facing up and towards the turnstile [Figure
18]. When validated, a chime will sound, a "PLEASE
ENTER" graphic will display on the TAS12 screen, and the
attendant notification lights will show GREEN, prompting
entry through the turnstile.
This function check is applicable to TAS12P-EDM models
equipped with an RFID reader only. Ensure paper is loaded in
the thermal printer before beginning.
NOTE
Printed
Ticket
Printer
Bezel
Scan a sample barcode to activate the turnstile. Each
sample barcode is good for one passage only.
1. To scan, place the barcode on the blackout pad
facing up towards the imager [Figure 18]. The imager
will beep when the ticket has been scanned. After
scanning, the barcode is sent to the GateLink10
server for validation.
• When validated, a chime will sound, "PLEASE
ENTER" will display on the TAS12 screen,
and the attendant notification lights will show
GREEN, prompting entry through the turnstile.
• When validation fails, an alert will sound,
"INVALID SCAN" will display on the TAS12
screen, and the attendant notification lights will
show solid RED.
Scan a Sample Barcode Ticket
Fig. 18
Fig. 19
