Page 26
For Assistance: [email protected] +1 (909) 591-8431 PUD4146R1-0
EDM Installation and Maintenance Instructions
Appendix B - Portable Base Guide Rail Installation
These supplemental instructions cover installation steps specific to portable base models only. When the installation is
complete, proceed to the Functions Check starting on page 16.
Portable Base Plate Illustrated Parts List
Tools Required
Portable Turnstile w/ Base Plate
(Qty 1)
1.
Remove the turnstile from container packaging.
2.
Slide the guide rail into the support posts and
tighten the four (4) set screws using a 1/8"
Allen wrench [Fig. B1 & B2].
3.
To maneuver the turnstile:
• Starting with the two (2) wheels on the
cabinet side, place foot on the top of the
wheel lever and push the lever to the down
position [Fig. B3].
• Repeat for two (2) remaining wheels on
guide rail side.
• Firmly grab the turnstile handle.
• Roll the turnstile to the desired location.
• Using your hands, pull the four (4) levers to
the up position to lock the wheels [Fig. B4].
Guide Rail
(Qty 1)
Also included
:
Hardware
• Guide Rail Set Screws
(Qty 4)
Electrical
• Neutrik Connector Kit
(Qty 1)
• 1/8" Allen Wrench
• POZIDRIVE #1 Bit
• 7/8" Open Wrench
Fig. B4
Lever up to lock
Fig. B3
Lever down to roll
Fig. B2
Fig. B1
