Series 248-2 Assembly Instructions
Dated 11/2021 Previous instructions become invalid.
2 /
12
Table of Contents
1. Safety Instructions and Warnings
2
1.1 Checking the kit contents
2
1.2 Warnings
2
1.3 Safety instructions
3
1.4 Copyright
4
2. Preparatory work / Personnel requirements
4
2.1 Personnel requirements
4
2.2 Tools and equipment required
4
2.3 Tightening torques of the bolts and screws
4
2.4 Preparations
5
3. Assembling the kit on the floor
5
3.1 Assembling the walls
5
3.2 Installing the frame crossmember
6
3.3 Attaching the roof
6
3.4 Wiring the kit and fastening the roof
6
3.5 Assembling the frame, doors, etc.
8
3.6 Sealing
8
3.7 Positioning on the underbody or chassis
8
4. Finishing Work
9
5. Maintenance, Service
11
5.1 Maintenance
11
5.2 Service
11
6. Disposal of Old Box Bodies and Components
11
7. Kit Contents
12
These instructions explain how to assemble the 248-2 kit with alumini-
um frame. To create a fault-free body,
always follow the work instruc-
tions described
, especially the following warnings,
otherwise the war-
ranty is voided.
If you ordered a steel frame or another custom design, it is possible
that individual work steps are not explained here.
Note:
coloured rep-
resentations are for illustration purposes only.
Get in touch with us
immediately in case of uncertainties.
1.1 Checking the kit contents
Check the delivery against the enclosed packing list
for
completeness.
Notify the delivering carrier immediately of any trans-
port damage. Please understand that we must reserve the right to make
changes to the design, features and technology delivered. The general
kit contents are listed on page 12.
1.2 Warnings
AluTeam generally does not know the precise intended purpose of the
kit.
As the body builder, you must match the order and use of the
kit to the requirements of your customer and the body
guidelines of the vehicle manufacturers
. This also applies to materi-
als used and surface finishes. Damage due to transport goods such as
aggressive chemicals are not a reason for complaint.
•
Store the
kit in a dry and clean place
(not outdoors).
1. Safety Instructions and Warnings
Always read through these instructions, completely and carefully, before assembling the kit!
