Altusen KN1000, Руководство пользователя

Страница: 25 / 194

1. Introduction
11
Rear View
No. Component Description
1 Circuit Breaker As a safety measure, if there is an overcurrent
situation, the circuit breaker will trip. Press this button
to recover normal operation.
2 Grounding Terminal The wire used to ground the unit connects here.
3 Power Inlet The power cord that connects the KN1000 to an AC
power source for power management functionality
plugs in here.
4 Power Outlet The power cord provided with the KN1000 package
that connects to the server for power management
plugs in here. See
Managing Power , page 25.
5 Power Jack The power adapter cable plugs in here.
6 Virtual Media Port The cable that connects the KN1000 to a USB port on
your server or KVM switch plugs in here. See
Virtual
Media , page 94, for virtual media details.
7 PC/KVM Port The KVM cable provided with this package that links
the KN1000 to your server / KVM switch plugs in here.
8 Console Port The cable for the local console (keyboard, monitor,
and mouse) plugs in here. The console can use either
a PS/2 or USB keyboard and mouse. Each connector
is color coded and marked with an appropriate icon.
9 PON Port This port is made available for use with a Power over
the NET™ remote power management module. Refer
to the User Manual that came with the PON device for
operation details.
10 RS-232 Port This serial port is provided for:
1. Serial console management (see Console
Management , page 59 for details); or
2. Out-of-band modem operation (see OOBC ,
page 62 for details).
1 2 3 4 5 6 7 8 9 10