- 10 -
Maximal Rack Access Power Controllers (Fused) Installation Guide
Fig. 12
Mounting Options:
B
C
A
Mounting Hardware
(Included):
Two (2) mounting brackets.
Eight (8) flat head screws
for mounting brackets.
Eight (8) pan head screws
for faceplate.
Remove center brace
from rack mount chassis
before proceeding with installation.
Fig. 13
Fig. 14
Fig. 13a
Fig. 14a
Fig. 13b
Fig. 14b
Fig. 13c
Fig. 14c
B
C
A
Rack Mount Installation
1. Remove center brace from rack mount chassis
(Fig. 12)
.
2. Slide mounting brackets (A) into slots located on left and right side of rack enclosure
(Fig. 13a).
Use three (3) flat head screws (B) to secure brackets.
3. Carefully place faceplate over LEDs, and secure using three (3) pan head screws (C) on top and
three (3) pan head screws (C) on the bottom of faceplate
(Fig. 13b).
4. Slide unit into desired EIA 19” rack position and secure with mounting screws
(not included) (Fig. 13c).
Wall Mount Installation
1. Carefully place faceplate over LEDs, and secure using three (3) pan head screws (C) on top and three (3)
pan head screws (C) on the bottom of faceplate
(Fig. 14a).
2. Place mounting brackets (A) onto the side of the left and right side of rack enclosure
(Fig. 14b).
Use three (3) flat head screws (B) to secure mounting brackets.
3. Mount rack and secure with mounting screws
(not included) (Fig. 14c).
C
B
A
