Altronix eFlow102NA8D, Быстрый старт

Страница: 11 / 16

eFlowNA8D Series Installation Guide - 11 -
Hook-Up Diagrams:
Fig. 7 Normally Open: Non-Latching FACP trigger input:
Fig. 6 Polarity reversal input from FACP signaling circuit output (polarity is referenced in alarm condition):
Fig. 5 Optional hook-up using two (2) isolated power supply inputs
(Only applicable on eFlow4NA8D, not evaluated by UL):
J2 J1
CUT JUMPERS
J1 AND J2
ISOLATED POWER INPUT
12 OR 24 VAC OR VDC
(LOCK POWER)
ISOLATED POWER INPUT
12 OR 24 VAC OR VDC
(ACM8 POWER)
CUT
JUMPER
FROM FACP
OUTPUT
CIRCUIT
+
--
FACP
OUTPUT EOL
TRG
FACP
NO C NC
FACP INTERFACE
N.O. TRIGGER
INPUT
TRG
FACP
NO C NC
FACP INTERFACE