Altronix ACMJ Series, Руководство по установке

Страница: 2 / 12

- 2 - ACMJ Series
Overview:
Altronix ACMJ Series units distribute and switch power to access control systems and accessories. They convert
a 115VAC 60Hz input into eight (8) independently controlled 12VDC or 24VDC fuse protected outputs. These
power outputs can be converted to dry form “C” contacts. Outputs are activated by an open collector sink or
normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR,
etc. Units will route power to a variety of access control hardware devices including: Mag Locks, Electric Strikes,
Magnetic Door Holders, etc. Outputs will operate in both Fail-Safe and/or Fail-Secure modes. The FACP Interface
enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm
disconnect feature is individually selectable for any or all of the eight (8) outputs.
ACMJ Series Configuration Reference Chart:
Altronix
Model Number
115VAC 60Hz Input (current draw) Power Supply Board Input Fuse Rating Power Supply Board Battery Fuse Rating Maximum Battery Charge Current 12VDC Total Output Current 24VDC Total Output Current Fused Outputs Individual Output Rating Class 2 Rated Power-Limited Agency Listings
UL Listings
and
File Numbers
AL400ULACMJ 3.5A
5A/
250V
15A/
32V
0.7A 4A 3A 8 3.5A P
UL File # BP6714
UL 294*
UL Listed for
Access Control
System Units.
“Signal
Equipment”
Evaluated to CSA
Standard C22.2
No.205-M1983
AL600ULACMJ 3.5A
5A/
250V
– 0.7A 6A 6A 8 3.5A –
AL1012ULACMJ 2.6A
5A/
250V
15A/
32V
0.7A 10A – 8 3.5A –
AL1024ULACMJ 4.2A
5A/
250V
15A/
32V
3.6A – 10A 8 3.5A –
LISTED
Altronix Corp.
140 58th St. Brooklyn, NY
California
State Fire
Marshal
NYC
Dept. of
Buildings
Altronix
Model Number
* ANSI/UL 294 7th Ed. Access Control Performance Levels
Destructive
Attack
Endurance
Test
Line
Security
Stand-by
Power
AL400ULACMJ I IV I I
AL600ULACMJ I IV I I
AL1012ULACMJ I IV I I
AL1024ULACMJ I IV I 12AH - II, 40AH - III, 65AH - IV
Output Voltage and Stand-by Specification Charts:
AL400ULACMJ
Voltage Switch Position Stand-by Battery 4 hr. Stand-by / 5 mins. Alarm 24 hr. Stand-by / 5 mins. Alarm
12VDC SW1 - ON 40AH 3.5A / 3.5A 0.5A / 3.5A
24VDC SW1 - OFF 40AH 2.75A / 2.75A 0.75A / 2.75A
AL600ULACMJ
Voltage Switch Position Stand-by Battery 4 hr. Stand-by / 5 mins. Alarm 24 hr. Stand-by / 5 mins. Alarm
12VDC SW1 - ON 40AH 5.5A / 5.5A 0.5A / 5.5A
24VDC SW1 - OFF 40AH 5.75A / 5.75A 0.75A / 5.75A
AL1012ULACMJ
Voltage Switch Position Stand-by Battery 4 hr. Stand-by / 5 mins. Alarm 24 hr. Stand-by / 5 mins. Alarm
12VDC N/A 40AH 9.5A / 9.5A 0.5A / 9.5A
AL1024ULACMJ (refer to AL1024ULACMJ Battery Size Calculation Worksheet, pg. 10).
Voltage
Stand-by
Battery
15 mins. Stand-by /
5 mins. Alarm
4 hr. Stand-by /
5 mins. Alarm
24 hr. Stand-by /
5 mins. Alarm
60 hr. Stand-by /
5 mins. Alarm
24VDC 12AH 7.7A / 9.7A 1.2A / 9.7A – –
24VDC 65AH – 7.7A / 9.7A 1.2A / 9.7A 200mA / 9.7A