
12
In addition, in spite of all the precautionary measures taken,
non-obvious residual risks can still exist.
Safety instructions
Read all safety warnings and all instruc-
tions.
Failure to follow the warnings and instructions may result
in electric shock, fire and/or serious injury.
For safety instructions, please refer to the enclosed bro-
chure “Safety instructions for crosscut and mitre saws”.
Keep the instructions in a safe place for future use.
Spare parts /
Description of device
Please refer to the attached assembly and oper-
ating instruction sheet.
Pos. Order-no.
Designation
1
363491
Lock for pendulum cover
2
Circuit closer/breaker
3
Handle
4
Motor
5
Transport locking pin
6
363478
Fixing screw for rotary table
7
363624
Work piece stop
8
Rotary table
9
Base plate
10
Scale for mitre angle
11
363482
Set screw for 45° saw head incline
12
363482
Set screw for 90° saw head position
13 363475
Hex
wrench
(SW4)
14 363480
Hex
wrench
(SW6)
15 363499
Protective
cover
16
363495
Saw blade, 210 x 25,4 x 2,8 mm – 24 T
17 363493
Pendulum
cover
18
363481
Locking screw for work piece stop
19
Scale for incline angle
20
363486
Incline fixing knob
21 363490
Dust
bag
22
Exhaust neck
23
Locking nut for set screw
24
Indicator for incline angle
25
363485
Saw blade locking device
26 363498
Hexagon socket screw for saw blade
mounting
27
363496
Front saw blade flange
28
363494
Rear saw blade flange
29 363497
Washer
31
Carrying handle
32 363502
Safety
label
33 363488
Carbon
brushes
34 363473
Vise
assembly
35
Mounting screw for the pendulum cover
36
Anti-tip device
Preparing for commissioning
To achieve flawless functioning of the machine, please
follow the instructions listed:
Place the machine at a location that meets the following
conditions:
secured against slipping
free of vibrations
even
free of tripping hazards
adequate light
Before each use, check
Connection cables for defects (cracks, cuts, etc.)
Do not use any defective cables.
the table insert for proper condition
Immediately replace a worn or damaged table insert.
the saw blade for flawless condition
Do not use deformed or damaged saw blades.
Connect the machine to a dust collection device when
sawing wood.
To ensure a safe position of the saw it must be bolted down
on a solid surface (e.g. workbench or support frame) at opti-
mal working height:
Mounting on a workbench / work table
Place the device on a level flat workbench or work table.
An uneven surface may result in saw blade jamming
or inaccurate cutting.
Make 4 holes in the workbench / work table matching the
holes in the base plate (9).
Disengage the transport locking pin
Make 4 holes in the support matching the holes in the
base plate.
Bolt the device down.
Removing the transport locking pin
Loosen the transport locking pin before first use and after each
transport:
Slightly push the handle (3) down
Pull out the transport locking pin (5)
Anti-tip device
If the saw cannot be mounted on a workbench or
work table, insert the anti-tip device (40) in the provided
holes on the rear of the rotary table. Secure it using two
screws.
Содержание 302563
Страница 26: ...26 II E 2012 19 E DIN EN ISO 3744 DIN EN ISO 11202 ISO 7960 A LWA 106 dB A LpA 93 dB A K 3 dB HSS...
Страница 28: ...28 3 5 40 230 V 30 mA IEC 60 245 H 07 RN F 1 5 mm 25 m 2 5 mm 25 m 2 a 21 21 22 22 40 mm 20 34 34 7 8 0 6 A 18...
Страница 30: ...30 6 20 25 26 5 35 17 1 27 16 28 27 28 26 25 4 mm 33...
Страница 31: ...31 0 3 5 2 5 17 16 20...