Alton ABCEDCOR77, Инструкция по эксплуатации

Страница: 17 / 32

17
Roof Felting
Position the first piece of felt (from diagram 29/30) in the back corner of the roof as shown by
diagram 31. Cut a 45mm slit about 45mm in from the one edge. Fold the longer edge down against
the soffit and nail down using Clout Nails (02-1675). Keep Clout Nails around 200mm apart. Top Tip is
to use your hammer as a measuring guide by marking 200mm from the one end with a marker pen.
Fold the small tab around the back corner and fold the shorter edge down over it against the soffit.
Again, Nail down using Clout Nails (02-1675) while keeping them spaced around 200mm apart.
Diagram 31
Position the second piece of felt
(from diagram 29/30) on top of
the roof, overlapping the
previous piece by 150mm as
shown by diagram 32.
Nail down the edges along the
soffit using Clout Nails (02-1675)
while keeping them spaced
around 200mm apart. Cut away
the excess felt using the soffit
underneath as a guide.
Using the same techniques of
overlapping the corners and
trimming against the edge,
continue to fit the remaining felt
from diagram 29/30 . Ensure to
overlap by 150mm and keep
the Clout Nails (02-1675)
spaced 200mm apart.
Diagram 32
Diagram 33
9