![Alto VOICE plus Скачать руководство пользователя страница 7](http://html.mh-extra.com/html/alto/voice-plus/voice-plus_user-manual_2911674007.webp)
6
3.1.3 VOICE OPTIMIZED EQ Section
Through this control, you can set the threshold of the compressor from -40dBu to +20dBu. The SKC (Smart
Knee Control) is applied to the audio signal, which is a maximum of 10dB above the set threshold. Above
such level, hard knee compression will be applied.
13. THRESHOLD Control
This control determines the expansion ratio when the signal drops below the threshold level, which can be
varied from 1:1.2 to 1:8. (Low ration for expander application or 1:8 for gate application.)
12. RATIO Control
-. COMPRESSOR
Both LEDs will show you the state of input signal in relation to the threshold level. If the input signal falls
bellow the set threshold level, the "-" LED will light up. This means that no signal is being compressed.
When the input signal rises above the set threshold level, the "+" LED will light up, this means that the
compressor is activated.
14. THRESHOLD LED
Lovable function, through this button the hard knee mode will be converted into SKC mode. If you want to
get a very musical compression and you wish to get the most inaudible compression, use SKC.
15. SMART Switch
It indicates the gain reduction. The range displayed is from 2dB to 30dB.
16. GAIN REDUCTION Meter
The ratio between the input and output level of audio signals exceeding the set threshold level is determined
by this control, which can be adjust from 1:1 to
:1.
17. RATIO Control
This control determines how fast the compressor is to respond to audio signal that will exceed the set thre-
shold. It can be adjusted from 1dB/ms to 150dB/ms.
18. ATTACK Control
This control determines how fast the compressor is to return to unity gain when the audio signal falls below
the set threshold level. It can be adjusted from 0.05dB/ms to 5dB/ms.
19. RELEASE Control
Through this control you can vary the output signal by a maximum of 20dB. In this way you can recover a
level that had been lost because of the compression process.
20. OUTPUT GAIN Control
It will read the actual output level. The range goes from -24dB to +18dB.
21. OUTPUT LEVEL Meter
22
23
24
25
26
27
ABSENCE
VOICE OPTIMIZED EQ
0
2
8
3
12
6
PRESENCE
dB
5
330
220
460
600
720
130
Hz
TUNING
WARMTH
dB
0
2
5
8
3
12
6
dB
BREATH
0
2
2
4
4
8
8
BYPASS
ACTIVE
Содержание VOICE plus
Страница 15: ...14 7 BLOCK DIAGRAM ...