Alto VOICE plus, Руководство пользователя

Страница: 13 / 17

5. APPLICATION
When use the VOICE plus mic pre-amplifier voice processor in a complex recording or PA system, the instrument or
voices to be recorded or processed are directly connected to the INPUT connector of this apparatus. Polish the program
materials depend on adjusting each function. The further details please refer to the following description:
-. Depending on the LINE switch to select the input signal types, releasing button for MIC input signal or engaging
button for LINE input signal;
-. In order to achieve the proper gain before noise, don't ignore the input gain control, it can compensate the gain
for external unit connected to VOICE has no input gain control. Besides, through the low cut function you can
reduce hum and stage rumble when using microphones.
-. If you sing into your microphone more gently in a soft passage, the level of the signal generated by your voice
will get much closer the floor noise level and such floor noise will become disturbing. In order to kill this problem,
expander/gate are used. Either more or less, the work done by expander/gate is similar to compressor, it's used
to eliminate hiss or hum from a stage amplifier, crosstalk in a system or any other kind of background.
-. The compressor is used to smooth out dynamic changes, create a more consistent volume throughout the pro-
gram materials. It has two main parameters: threshold and ratio. Generally speaking, lower ratios are best for
vocals and acoustic guitars; higher ratios tame the errant drum hit.
-. In fact, the EQ function is corrective device, which is used to remove unwanted frequencies, or compensate for
imperfect microphone response curves etc..
-. Adjust the output volume control to get the proper gain.
Here, we will introduce the common wiring configuration about VOICE plus in a system. Please reserve your time to
well understand the application example, so as to be able to fully exploit the VOLICE plus and its versatile features.
MIXER
OUTPUT INPUT
RECORDING SEND LINE MIC
INSERT
MAIN
TIP
SLEEVE TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1 TIP/PIN 2
RING/PIN 3
SLEEVE/PIN 1 TIP
SLEEVE AC INPUT
95-120V
/210-240V 60-50Hz
Rated Power Consumption 20W
FUSE:
210-240V: T315mAL 250VAC
95-120V: T500mAL 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
Apparaten skall anslutas till
jordat uttag nar den ansluts
till ett natverk
RETURN
110-120V
220-240V
A101
DAT Recorder or hard-disk recording system
DIGITAL MIX
ON / OFF
UTIL EDIT ESC ENTER DOWN
UP
ON
OFF
POWER
24 32 BIT
DIGITAL EFFECTS
VERB
SAVING
PRESET
PROCESS
OVERFLOW
PROCESS
OVERFLOW R LTO
OUTPUT LEVEL INPUT LEVEL MIX
10 OFF WET DRY 10 OFF
-18
-24
-30
-6
-12
CLIP
EFFECTS device
2
1
3
12
MIC or other program materials