Alto VOICE plus, Руководство пользователя

Страница: 10 / 17

These connectors are used to input the signal source. You can input the signal via the balanced 1/4"TRS
phone jack or XLR connector.
36. Audio INPUT
This connector is meant for the connection of the supplied main cord. Do not insert power cord into
unit until voltage has been correctly set. Do not plug power cord into AC power until voltage has been
correctly set.
35. AC Inlet
Through this unbalanced 1/4" jack the audio signal can be routed to an external effects devices.
37. SEND
The return signal from an external effects devices will be processed through this 1/4" jack.
38. RETURN
These connectors are used to output the signal. You can output the signal via the balanced XLR
connector or 1/4"TRS phone jack.
39. MAIN OUTPUT
The XLR connector is used to output the signal to DAT Recorder or hard-disk recording system for
recording.
40. RECORDING
4. INSTALLATION AND CONNECTION
4.1 Mains Connection
4.2 Audio Connection
experiencing a signal loss.
a. Wiring Configuration
Both types of connectors available on VOICE plus can be wired in balanced and unbalanced modes.
Please see following drawing for details.
VOICE plus is provided with dual voltage plug. You must check the power supply voltage available in your
country before connecting the power cord in the wall outlet.
The VOICE plus Mic Preamplifier/Voice Processor is equipped with balanced XLR connectors as well as 1/4"
phone jack and can be connected with other units in different ways to support a vast range of applications without
For 1/4" Phone jack
TS Type Unbalanced
Sleeve
Tip
+
TRS Type Balanced
Tip
Ring
Sleeve
+
-
TRS Type Unbalanced
Tip
Ring
Sleeve
+
9