To access the precedent page select page number and press Esc.
THR.
00 dB
ATK.
0.05 S
REL.
0.4 S
POL.
DIR
POL.
DIR
THR.
00 dB
ATK.
0.05 S
REL.
0.4 S
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
POL.
DIR
THR.
00 dB
REL.
0.4 S
ATK.
0.05 S
Press the mute key, the related channel is muted.
12
2.Plug the left line-in into INPUT1 and the right line-in into INPUT2
5.APPLICATION ILLUSTRATION
1.Set the input /output path as the following
:
connection
5.1
LTO DRIVE 2.3 2-Way Input, 4- Way Output (High, Mid, Low, Sub MIXED MONO)
b. IN L / IN R
Here input channels can be configured:
9
Release, Limiter Attack; the selected values can be changed by means of the dial.
Use Up/Down/Left/Right keys to select one of the five fields: Page Number, Polarity, Limiter Threshold, Limiter
otherwise whatever preset loading or power cycle of the system will overwrite and erase completely the edited
data.
When the current preset has been edited, it is necessary to save this preset by means of the STORE function,
Up/Down/Right/Left key
: These keys are used to navigate the menus and to modify the parameter values.
Enter/Esc key
: These keys are used to access or to leave the menus, or to confirm the parameter values.
Edit key
: This key allows the user to enter the edit menu (the related LED will light)
When entered the edit menu, the user will be able to access and modify all the parameters related to the process,
when the user modifies one parameter value, the LED starts to blink to signal the update. The LED will blink until
the storing of the new modified preset in one of the 64 available locations.
Vu-meter:
This function allows the user to use the vu-meter to show the input signal level.
Mute keys:
LTO DRIVE has 4 mute keys.(each channel has one mute key).
If you want to present your
LTO DRIVE 2.3 in a 2-way input, 4-way output (high, mid, low, sub application, please
connect your system as the following illustration step by step:
3.Set OUTPUT1, OUTPUT2, OUTPUT3, OUTPUT4 as high
mid
low
subfrequency band OUT separately.
4.Connect the OUTPUT1 to the high frequency amplifier, OUTPUT2 to the mid frequency amplifier, OUTPUT3 to
the low frequency amplifier, OUTPUT4 to the sub frequency amplifier.
With the Up/Down keys it is possible to select the inputs and the outputs sequentially. In the pictures below the
selection sequence is shown.
The Right/Left keys make/cut the connection between the selected input and output. In the case above, pressing
the Right key, the Left channel will be connected to the OUT 3 channel.
To get back to the main menu, select 1/1 and press the Esc key.
