Alto-Shaam 500-1D, Руководство оператора

Страница: 34 / 40

M
AINTENANCE
Drawer Warmer
▪
Operator’s Manual
▪
M N-46969
▪
Rev 1
▪
5/20
34
How to Clean the Drawer Warmer
Before you begin
Before first use Thoroughly clean the drawer warmer before using.
Daily cleaning
procedure
To clean the drawer warmer daily, do the following.
Step Action
1. Make sure the drawer warmer is disconnected from the power source and
cool—drawer is less than 140°F (60°C).
2. Remove drawer pans and wash separately.
3. Remove the drawers and wipe with a damp cloth.
4. Remove the drawer rails by lifting the rail off of the bottom pins and bolt, and
then sliding it off of the top pin.
5. Wipe the inside and outside of the drawer warmer with a damp cloth.
6. Wipe the control panel, drawer vents, and drawer handles, and gaskets with
a non-abrasive nylon scrub pad.
7. Wipe the outside of the drawer warmer with a stainless steel cleaner.
Result
The drawer warmer is now clean.
WARNING:
Electric shock hazard.
Set the power switch to the OFF position and unplug the
appliance.
CAUTION:
Burn hazard.
Allow the drawer warmer to cool before cleaning.
CAUTION:
Corrosive materials hazard.
Wear eye protection and hand protection when cleaning.
NOTICE
Using improper cleaning procedures will damage the
appliance and void the warranty.
Do not use steel pads, wire brushes, or scrapers when
cleaning.