Alto-Shaam 500-1D, Руководство оператора

Страница: 33 / 40

M
AINTENANCE
Drawer Warmer
▪
Operator’s Manual
▪
M N-46969
▪
Rev 1
▪
5/20
33
M
A
IN
T
E
N
A
N
C
E
Maintenance Schedule
Requirements
▪
S ee topic How to Clean the Drawer Warmer .
▪
Disconnect the drawer warmer from power source and let cool.
Daily
For daily maintenance, do the following.
▪
Remove any spills with disposable paper wipes or a damp cloth.
▪
Wipe
the outside of the drawer warmer with a damp cloth.
▪
Check the display screen for cracking or peeling. Contact Technical Service if
needed.
Weekly For weekly maintenance, do the following.
▪
Clean the entire drawer warmer. Make sure to use a non-abrasive nylon scrub
pad.
▪ Do not spray the cleaner directly into the fan openings located in the rear of the
drawer warmer.
Monthly For monthly maintenance, do the following.
▪ Inspect drawers and drawer rails.
▪
Inspect drawer vent slides for proper operation (if applicable).
▪
Calibrate the temperature sensor.
▪
Inspect door handle screws and tighten if necessary.
Yearly For yearly maintenance, do the following.
▪
Check and tighten all wire connections.
▪ Measure the current draw.
▪
Test the heating elements for electrical short to ground.
▪
Inspect the condition of the cord and plug.
▪
Check and tighten the cord connection inside of the appliance control area.
▪ Measure the site voltage.
▪
Inspect and adjust voltage monitor board if needed.
▪
Inspect and test the control and control functions.
▪
Calibrate the temperature sensor.

NOTE:
Must be performed by a qualified professional.