Altman Spectra Cyc 100, Руководство по обслуживанию и запасным частям

Страница: 17 / 45

15
Spectra Cyc LED Luminaires Service Manual
Maintenance Procedure
Manual Calibration Procedure on a Spectra Series CYC Fixture
Note: Write down the specific intensity levels as your color matching for the unit that is being calibrated.
Then set all 4 channels to the levels you choose during color matching. Set your reference fixture channels
to 100% and compare the two fixtures making sure that white wash is matching. Make any additional ad -
justments if needed. It is not recommended to calibrate with all 4 channels on as color matching may not be
accurate.
Once you have selected your new calibration levels and all four channels are at their high trim levels press the ones
button on the fixture to save calibration.
Turn the fixture off and then back on again to resume normal operation with the new trim values.
Additional Notes:
-While in calibration mode, pressing the ones buttons will over-write the prior calibration values. After the values have
been set, you can re-record them while still in calibration mode. You do not need to exit and re-enter the calibration
mode. You can simply set the new values and re-record them any time.
-If you enter calibration mode and do not record new values, the old calibration values will remain in place after cy -
cling the power.
-Calibration mode bypasses the keyboard lock feature.
-Restore defaults bypasses the keyboard lock feature.
***IMPORTANT – Calibration mode ignores the temperature sensor.
***IMPORTANT – Attempting to enter calibration mode with the fixture set up for a standalone function will
yield unpredictable results. Please make sure the fixture is in DMX mode when powering the fixture up to
enter calibration mode.
6.
7.