Altimium SCA51T, Руководство пользователя

Страница: 31 / 48

Compact Scaler Switcher (with PoC)
Altimium 26 www.altimium.com
Command Function Feedback Example
50908% Left CEC cmd: left
图像下侧向上拉伸 Output Height Adjust xx
50909%
Right CEC cmd: right
50910%
Conform command CEC cmd: select
50911% Exit command CEC cmd: exit
Note:
1. Turn on/ off HDCP auto-management by sending serial commands.
a) When HDCP is set to active, whether output source is with HDCP depends on
input source. If the input source is with HDCP, so is the output and vice versa.
b) When HDCP is set to Manual, whether the output is with HDCP depends on the
statue of HDCP. Turn off HDCP, then the output is without HDCP and vice versa.
2. Screen output adjusting avails only when the screen output adjusting is on. Send
command 50678% to turn on.
3. CEC commands with grey background avails only when CEC is on.
4. MIC precedence: In Mute mode, if the MIC noise detecting is on, the device will
unmute MIC automatically given the outer noise exceeds the limit of noise detecting.
Send 50696% to enable MIC precedence, then the device will not be able to change
the mute mode no matter how loud the noise is.
4.4.4 Control SCA51T or 3rd Party Device from Local
Firstly, connect the RS232 port of SCA51T to RS232 port of PC.
Secondly, send command 50787% (serial control mode 1, factory default) via RS232
communication software.
Lastly, send the right command of SCA51T or other remote RS232 device connected in
present system. Connect as below: